Diamond Wire Saw VS Diamond Saw Blade in Stone Processing - WMBB News 13 - The Panhandle's News Leader

Diamond Wire Saw VS Diamond Saw Blade in Stone Processing

Posted:

This article was originally distributed via PRWeb. PRWeb, WorldNow and this Site make no warranties or representations in connection therewith.

SOURCE:

iAbrasive makes a comparison between diamond wire saw and diamond saw blade in stone processing.

Zhengzhou, China (PRWEB) July 08, 2014

iAbrasive makes a comparison between diamond wire saw and diamond saw blade in stone processing. Read the original article at: http://www.iabrasive.com/articles/diamond-wire-saws-vs-diamond-saw-blades-in-stone-processing.

Raw Stone Processing

Stones exploited from mines with irregular form and rough section are called raw stones, which can not be applied in plate processing immediately. At present, raw stone in China mainly involves marble and granite. With the development of technology, the old way of shaping stones by labor is outdated.

Diamond saw blade used to process raw stones usually owns a large circular saw blade, on which diamond grits are inserted. Owning to its flexible property, diamond saw blade can be used to process ultra-hard stones. However, its diameter is usually large, and its height is twice the stones to be processed together with the diameter of Flange. It is not easy to produce diamond saw blade with too large diameter. Therefore, diamond saw blade is unsuitable to process oversize plates.

Comparatively, diamond wire saw not only owns the flexibility of ropes, but also owns rigidity of diamond. Moreover, they are not limited by length. Due to those features, diamond wire saws are almost applicable to cut any large objects. It has many advantages, such as short time preparation, strong flexibility, high efficiency, energy saving, etc, which make diamond wire saws popular in stone mining and stone processing.

Plate Cutting

When processing stones, plate cutting is a quite important step. Usually diamond saw blades are used to cut plates. But in this situation, the size of plates is relatively small. One diamond wire saw is able to cut large plates and ultra-large plates, and is not restrained by the thickness of stones. However, compared with diamond frame saws containing several tens or a few hundreds saws, diamond wire saw is neither efficient nor cost-effective. Consequently, diamond wire saws are used when plates are too thick or their amount is small. With the development of technology, combined diamond wire saws are went out. Combined diamond wire saws can be applied in cutting marble and granite plates when changing different beads or linear velocity of diamond wire saws.

Irregular Stones Processing

Irregular stones refer to all special-shaped stones except sheet and block stones, and include many types, such as pillars and arches. Nowadays, peoples demands are much stricter, so it is with irregular stones processing. In the course of irregular stones processing, diamond wire saws and diamond saw blades are used. Owing to its high linear velocity, diamond wire saws could shift curve type and arc type, and can be widely applied in processing parquet and curved sides.

For more information, please visit: http://www.iabrasive.com/.

For the original version on PRWeb visit: http://www.prweb.com/releases/2014/07/prweb11998918.htm

Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact pressreleases@worldnow.com.